Ricoh 3030 Operating Instructions Manual page 126

Other Transmission Features
Note
❒ If a user logs in with User Code, the transmission result is sent by e-mail to
the logged-in user.
❒ You can confirm transmission results by using both the E-mail TX Results
function, which sends the results by e-mail, and the Communication Re-
sult Report printed by the machine. You can set whether to use both of
these together in User Parameters (switch 10, bit 6) in the Facsimile Fea-
2
tures menu.
❒ You can use Communication Result Report, etc. to check usage status by
specified users. If user authentication is set, you can check usage by
logged-in users. If User Code is set to sender, you can count the number of
uses by each user.
❒ To cancel the Sender Name, cancel the transmission. See "Canceling a
Transmission".
❒ You can program one of the Quick Operation keys with operations for this
function. Using the key allows you to omit step
Reference
p.103 "Canceling a Transmission"
"Facsimile Features", General Settings Guide
"Registering Addresses and Users for Facsimile/Scanner Functions", Gen-
eral Settings Guide
116
B
.