Ricoh 3030 Operating Instructions Manual page 122

Other Transmission Features
C
Press [Send Later].
D
Enter the time using the number keys and select [AM] or [PM]. Then press [OK].
2
Press [Economy Time] to specify the economy time.
When entering numbers smaller than 10, add a zero at the beginning.
If you make a mistake, press [Clear] or the {Clear/Stop} key before pressing
[OK], and then try again.
To cancel Send Later, press [Cancel]. The display returns to that of step
The specified time is shown above the highlighted [Send Later].
E
Press [OK].
The standby display appears.
To check the settings, press [Transmission Mode].
F
Specify a destination, and then press the {Start} key.
Note
❒ You can specify a time within 24 hours of the current time.
❒ If the current time shown is not correct, change it.
❒ Set the Economy Transmission Time in the Facsimile Features menu to co-
incide with off-peak call charge time.
❒ You can program one of the Quick Operation keys with operations for this
function. Using the Quick Operation key allows you to omit steps
❒ You can cancel the transmission setup for Send Later. See "Changing the
Transmission Time".
Reference
p.192 "Changing the Transmission Time"
"Facsimile Features", General Settings Guide
"Troubleshooting When Using the Facsimile Function", Troubleshooting
112
C
.
B C
and .