Entering A Tone - Ricoh 3030 Operating Instructions Manual

Transmission

Entering a tone

This function allows a machine connected to a pulse dialing line to send tonal
signals (for example if you want to use a special service on a tone dialing line).
1
When you press the {Tone} key, the machine dials the number using tonal signals.
This section explains how to use the tone function with On Hook Dial as an example.
A
Press the {On Hook Dial} key.
B
Enter the fax number using the number keys.
C
Press the {Tone} key.
D
Enter the number you want to tone dial using the number keys.
E
Press the {Start} key.
If you want to cancel a transmission, press the {Clear/Stop} key, and then re-
move the originals.
After transmission, the standby display appears.
Note
❒ Certain services may be unavailable even when using the {Tone} key.
❒ A tone is shown as a "·" on the display and the next numbers are dialed
using tonal signals.
58
ZLBS070N