Ricoh 3030 Operating Instructions Manual page 58

Transmission
B
Select the resolution you require, and then press [OK].
1
Note
❒ If you install the optional expansion memory, "Super Fine" appears in the
Resolution box.
❒ If the other party's machine does not support the resolution at which you
are sending, this machine automatically switches to a resolution that is
supported. You can check the resolution at which you actually sent by
printing the Journal.
❒ Sending with Super Fine resolution requires that the machine has the op-
tional expansion memory, and the other party's machine has the capability
to receive fax documents at Super Fine resolution.
❒ The machine supports Standard, Detail, Fine (with the optional expansion
memory), and Super Fine (with the optional expansion memory) resolu-
tions for reception.
❒ You can set the resolution type that is selected right after the machine is
turned on or the {Clear Modes} key is pressed, with [Text Size Priority] under
Gen. Settings/ Adjust in the Facsimile Features menu.
❒ When using Internet Fax transmission, documents are sent at "Detail" res-
olution, even if you have specified "Super Fine". To send a document at
"Super Fine", configure the Full Mode when registering the destinations in
the Address Book.
Reference
p.35 "T.37 Full Mode"
p.208 "Print Journal"
"Facsimile Features", General Settings Guide
48