Putting On Hold And Retreiving Successively Or Simultaneously - Siemens OpenStage 60 SIP User Manual

Basic functions
Step by Step
80
Putting on hold and retreiving successively or
simultaneously
Putting an active call on hold
Prerequisite: You have a single-line phone and are con-
ducting a consultation call
a second call
be configured
S
Press the "Hold" key. The key flashes. The consultation
or second call and the first call are put on hold.
Retrieving the first call
b
Switch to the first call.
R
Press the flashing "Hold" key. You are connected with
the other partner. The consultation or second call con-
tinues on hold.
Retrieving the second call
d
Switch to the held consultation or second call.
R
Press the flashing "Hold" key. You are connected with
the other partner. The first called was put on "Hold"
again.
page 76 or have answered
page 109. The "Hold" sensor key must
page 93.