Consulting A Second Party - Siemens OpenStage 60 SIP User Manual

Basic functions
Step by Step
Consultation
Start Conference
Repeat dialing S. Hawking
Disconnect & return
76

Consulting a second party

You can call a second party while a call is in progress.
The connection to the first party is placed on hold.
Prerequisite: You are conducting a call.
Select and confirm the option shown in the connec-
tions's context menu.
or Start conference
Select and confirm the option shown in the context
menu for the call connection when you intend to set up
a conference with the new participant. You can also use
an already configured Conference key in this instance.
j
Enter and confirm the second party's phone number.
If you are using a dial plan and Immediate dial-
ing is set (see
performed as soon as the character string en-
tered matches an entry in the dial plan.
or In the pop-up menu:
Confirm the option shown
If you want to use the phonebook or a call list
for the consultation call or the new conference
parties, select Hold instead of Consult and/or
Start conference in the context menu or press
the Hold key and then open the phonebook or a
required call list (
Alternatively you can select the phonebook or a
call list without using the Hold functions - the
active call is automatically placed on Hold.
Ending a consultation call
Select and confirm the option shown in the context
menu.
The consultation call is disconnected. The call with the
first party is resumed.
[1] Please note the information in relation to the call journal on
page 73
page 71, dialing is automatically
[1]
.
page 156).