Line Preview - Siemens OpenStage 60 SIP User Manual

Making calls with multiple lines
Step by Step
154

Line preview

Prerequisite: You are already on a call on one line and a
further call rings on a secondary line. You have pro-
grammed a sensor key with the "Preview" function
page 93.
Preview for a call
Prerequisite: Your administrator has deactivated the
permanent preview function.
S
Press the "Preview" sensor key. The key illuminates. The
preview function is temporarily activated.
T
Press the flashing line key. A popup window opens and
you receive information about the caller. Press the line
key again to accept the call or wait until the popup clos-
es itself after a specified period of time.
The preview function is switched off and has to be
switched on again for a further operation.
Permanent preview
Prerequisite: Your administrator has activated the per-
manent preview function.
S
Press the "Preview" sensor key. This way the preview
for all lines with "preview mode" remains active until you
press the "Preview" sensor key again.
If the line preview has been deactivated, a call is
answered immediately on a line when the line
key is pressed, without first showing caller infor-
mation.