Call Waiting (Second Call) - Siemens OpenStage 60 SIP User Manual

Step by Step
Accept

Call waiting (second call)

You can accept a second incoming call in the course of
an ongoing call. The caller hears the on-hook signal
while you hear a call-waiting signal tone.
You can reject or accept the second call. Before you ac-
cept the second call, you can end the first call or place
it on hold for subsequent retrieval.
You can block the second call or the signal tone
( page 111).
Accepting a second call
Prerequisite: You are conducting a call and call waiting
is allowed ( page 111).
In the pop-up menu:
Select and confirm the option shown.
You can talk to the second party.
The connection to the first party is on hold.
You can still
• toggle between an initial and second call or
• put on hold and retrieve second and first call
successively page 80
or
• initiate a conference
Consultation call from second call
If the second call is your active call you can initiate a
consultation call from it.
Prerequisite: The administrator must have approved
the consultation in the second call.
From a consultation call in the second call you can
• initiate a conference
• toggle between the second call and a consultation
call
• put on hold and retrieve second and consultation
call successively
• transfer a call
• disconnect the calls again
During a consultation in the second call, the first call is
parked and can only be unparked when the consultation
or second call ends or these calls were connected.
Enhanced phone functions
page 80
109