Putting On Hold And Retrieving Successively Or Simultaneously - Siemens OpenScape 35G User Manual

Basic functions
Step by step
52
Putting on hold and retrieving successively or
simultaneously
Putting an active call on hold
Prerequisite: You have a single-line phone and are con-
ducting a consultation call  page 50 or have accepted
a second call  page 84.
Hold Press the Hold key. The key flashes. The consultation or
second call and the first call are put on hold.
Retrieving the first call
<
Switch to the first call.
Hold Press the flashing Hold key. You are connected with the
other party. The consultation or second call continues
on hold.
Retrieving the second call
:
Switch to the held consultation or second call
Hold Press the flashing Hold key. You are connected with the
other party. The first called is put on Hold again.