Siemens OpenStage 60 SIP User Manual page 111

Step by Step
Deflect
Complete Xfer
]
User
Configuration
Deflecting a second call
Prerequisite: You are conducting a call and call waiting
is allowed (
In the pop-up menu:
Select and confirm the option shown.
j
Enter and confirm the phone number.
The second call is deflected to the destination speci-
fied.
Connecting parties
Select and confirm the option shown in the active con-
nections context menu. The other two parties are now
connected to one another. You can now hang up or dial
another number for instance.
or Connect by hanging up
Prerequisite: Connecting by hanging up is activated
(ask your administrator) and "Toggle associate" must be
set to "Yes" (
n
or
Replace the handset or, if you are in speakerphone
mode, press the loudspeaker key. The other two parties
are now connected to one another.
Allowing call waiting
z You can also configure this setting via the Web interface
page 271.
Prerequisite: The option was programmed by your ad-
ministrator.
v
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
page 111).
page 112).
If the Call waiting (second call) function is deacti-
vated, a caller hears the busy signal if you are al-
ready conducting a call.
Enhanced phone functions
111