Table of Contents
Advertisement
4. Input of the presser type
(1) Setting procedure of the presser type
1) Call the presser type setting parameter.
❹
When MODE key
memory switch (level 1) edit screen A is dis-
played.
2) Select the presser type.
Press DATA CHANGE key
picture is changed as shown in the illustration
below. Set the presser type B actually mounted
on the sewing machine referring to (2) Table of
presser type below.
Type 1
Type 2
(2) Table of presser type
Set the number in the frame of engraved part number of presser to the type of presser.
Type
Type 1
Type 2
Type 3
Type 5 *
is pressed, the
❼
, and the
Type 3
Type 5 *
Part No. of presser foot
B151177 1 000 *
B151177 2 000 *
B151177 3 000 *
—
– 25 –
A
B
* Set type 5 when using the presser other than
type 1 to 3. Change
width and
Presser size length of the
memory switch (level 1) to adjust to the press-
er to be used.
→ Refer to
"V-21. Method of changing
memory switch data"
* When using type 5 with stitch width of 6 mm
or more and 41 mm or more in length, it is
necessary to replace components such as
presser arm, feed plate, etc.
❼
❹
Presser size
p.55.
Advertisement
Table of Contents
