Table of Contents
Advertisement
1-11. Changeover of men's and ladies' wear.
Perform changeover of men's and ladies' wear since men's and ladies' wear are different in the carriage
direction of sewing products.
A
[ Setting procedure of cloth ]
In case of men's wear, the position where sewing products are preset is the sewing start position of the first
sewing pattern. In case of ladies' wear, the place moved to the right-hand by 600 mm from the position whe-
re sewing products are preset is the sewing start position of the first sewing pattern. For both men's and la-
dies' wear, the sewing start position can be moved to the left-hand or right-hand by jump feed before sewing
.
②③
Setting
paper
Ⓓ
④
①
(Men's garment body)
Ⓒ
(Ladies' garment body)
① Display AC data input screen.
Display the AC data input screen (pink) of AC pattern No. you
desire to sew.
② Perform changeover of men's and ladies' wear.
When MEN'S/LADIES' WEAR SELECT button
pressed, changeover of men's and ladies' wear can be performed.
Men's wear :
Ladies' wear :
②
Needle
Ⓓ
Ⓒ
③
(Reference)
Loosen thumbscrew ③ of gauge ② of preset
1)
table ① , move to the set place of scale ④ and
fix it.
Afterwards, adjust top end Ⓒ of cloth to inside
2)
Ⓓ of the pointer and set the cloth to position it.
(For the ladies' wear, similarly adjust with the
pointer and scale on the left side.)
– 66 –
(A) is
Advertisement
Table of Contents
