Included Hardware And Documentation - Intel Atom N270 User Manual

SPI BIOS flash
PCI Express*
PCI expansion
Clocks
RTC
Thermal
Monitoring
Processor Voltage
Regulator
Power Supply
Debug Interfaces
Power
Management
Form Factor
Note: Review the document provided with the Development Kit titled "Important Safety and
Regulatory Information". This document contains safety warnings and cautions that
must be observed when using this development kit.
2.3

Included Hardware and Documentation

This following hardware and documentation is included in the development kit:
• Intel
Development Board (Installed)
• Firmware Hub (FWH) (Installed)
• Combination CPU/GMCH heatsink (Installed)
• Jumpers (Installed)
• 1 GB DDR2 SODIMM (Installed)
• Type 2032, socketed 3V lithium coin cell battery (Installed)
• Mini-ITX Chassis
• 12V AC-DC adapter with universal AC plugs
• SATA DVD-ROM Drive (Installed)
• 80 GB 2.5" SATA Mobile Hard Drive (Installed)
• Associated cables (Installed)
• Documentation and Software CD
16
CRB Implementation
1 internal port (supports USB flash)
Socketed, 8 Mb
1 PCIe* 1.1 X1 slot
1 PCI 2.3 slot
IDT* ICS9LPRS501 system clock
generator
Battery-backed real time clock
Processor temperature sensor
®
Intel Mobile Voltage Positioning
®
(Intel MVP)-6 for processor core
12VDC +/-5% 2mm connector
Extended Debug Port (XDP)
ACPI Compliant
Mini-ITX
®
Atom™ Processor N270 and Mobile Intel
Getting Started
Comments
8-pin socket
Non-standard location
Un-populated (rework required)
CK-505 compatible
12VDC, 5.0A, 60W
XDP connector
S0 – Power On
S3 – Suspend to RAM
S4 – Suspend to Disk
S5 – Soft Off
6.75" X 6.75" (17 cm X 17 cm)
®
945GSE Express Chipset
Developer's Kit User Manual