Table of Contents
Advertisement
A Customizing the Support Anywhere
HP NetServer
This appendix covers the procedures for a customized installation of Support
Anywhere Server software. Do not attempt to customize Support Anywhere's
SNMP alarm agent software unless you are a confident network administrator
and understand the use of command line parameters.
Installing SNMP Software Agents Manually on
Novell NetWare Servers
As you add or reconfigure Novell NetWare servers, you may opt to install the
Support Anywhere server software on each server independently. If you want to
install or reinstall the software at a later date, you can use the Support Anywhere
Client installation program found on the HP Support Anywhere Client Diskette to
install the software without reinstalling the rest of the Support Anywhere
program files.
If your AUTOEXEC.NCF file does not include the HP NSALOAD command, the
Support Anywhere software (which is made up of several NLMs) will not load
automatically whenever the server is started. If so, you will then need to load the
software manually each time you start the server.
To load the Support Anywhere manually on your Novell NetWare servers, type
the following at your server's Support Anywhere Client:
NSALOAD
Loading the Automatic Server Restart Software for Novell NetWare
If you installed the Support Anywhere software on your server through the
Support Anywhere installation program, the ASR NLMs were copied to that
server and enabled automatically. If you have done this, skip to step 4. Otherwise,
proceed to step 1. Note that this installation procedure assumes that a Novell
NetWare server and client have already been set up and are working correctly.
To manually install ASR for Novell NetWare:
1. Insert the HP NetServer Navigator CD-ROM in your server's CD-ROM
drive, or logon to a network accessible CD-ROM drive. If you prefer, you
79
Advertisement
Table of Contents
