Hp Remote Console Redirection (E 40 And E 45 Only) - HP Support Anywhere Installation And User Manual

Chapter 3
For supplemental information on setup and use of the Remote Console feature at
the server, see "Server Management Using HP Support Anywhere" in the HP
NetServer E Series User Guide.

HP Remote Console Redirection (E 40 and E 45 only)

The HP NetServer E 40 and E 45's built-in Remote Console Redirection feature
can be used to provide troubleshooting and diagnostic services. Remote Console
Redirection allows you (or a VAR or system administrator) to manage, monitor
and configure a server without traveling to the NetServer site. Using Remote
Console Redirection, you can access and initiate all the configuration and
diagnostic features incorporated into the HP NetServer Utility Partition. The
following illustration shows how HP Remote Console Redirection works.
Support Anywhere
Server
After setting the
server to receive
using the Utility
Partition Console
Redirection feature,
the server may be
taken over by the
remote console.
You (or your customer) may need assistance setting up a NetServer for HP
Console Redirection, particularly if you are unfamiliar with DOS prompt
computing. In such cases, HP recommends that you first establish phone contact
with an assistant and walk them through the setup defined in "Part 1 Setup at the
HP NetServer" of the installation steps that follow.
42
Installing the HP Support Anywhere Software
Modem
Modem
NetServer
Figure 11: HP Remote Console Setup
Remote
Console
Support Anywhere
Remote Console
Using a modem, the
offsite remote console
workstation, using
pcANYWHERE32, may
dial into and run
diagnostic utilities on
the HP NetServer.