Table of Contents
Advertisement
Chapter 3
config
The IPX address takes the following form:
internal network number-000000000001
An IPX is always composed of two elements, the 8-character internal network
number and, separated by a dash, a 12-character, device number node address.
Thus:
XXXXXXXX-YYYYYYYYYYYY
where X =internal network number, and Y=000000000001.
Assemble the IPX address using the information provided by the NetWare config
command.
NOTE
Be sure to list the network address (internal network number)
first, and separate it with a dash from the node address.
To find the IP address of a Windows NT server, use the "ipconfig" program.
At the Windows NT NetServer:
1. At the DOS prompt, execute the program:
ipconfig.exe
2. Be sure to write down the IP address number. For example:
14.60.81.230
To find the IPX address of a Windows NT NetServer, use the "ipxroute
config" program.
At the Windows NT NetServer:
1. At the DOS prompt, execute the following program (include the config
parameter):
ipxroute config
2. The ipxroute config program may or may not specify the complete IPX
number.
If the IPX internal network number is specified, the IPX address takes
the following form:
internal network number-000000000001
Installing the HP Support Anywhere Software
25
Advertisement
Table of Contents
