Certificate Generate; Console Log; Command Mode; Console - HP Integrity RX4640 Operation Manual

• TRANSMIT CONFIGURATION STRINGS: Disable this setting whenever the modem being used is not
compatible with the supported modem (MT5634ZBA).
• MODEM PRESENCE: When the modem may not always be connected, set this parameter to "not always
connected".
For example: A modem attached through a switch. In mode "not always connected," no dial-out functions
are allowed: DIAL-BACK is disabled, and PAGING is not possible.
The MP mirrors the system console to the MP local, remote/modem, and LAN ports. One console output
stream is reflected to all of the connected console users. If several different terminal types are used
simultaneously by the users, some users may see strange results.
Example 4-19 HP-UX
Applications that care about the terminal type (install, SAM, vi, and so on) running on HP-UX use three
methods to determine the terminal type:
1. The application takes the terminal information from the OS. This value is set in the CA command and
takes effect for all MP ports.
2. The $TERM shell environment variable.
3. The application directly queries the terminal (in this case, the write enabled terminal establishes the
terminal type).
Make sure that settings #1 and #2 agree with your terminal type.

Certificate Generate

CG: Generate RSA key pair or Self Signed Certificate
This command generates a new RSA key pair and self signed certificate.

Console Log

CL: Console Log—view the history of the Console output
This command displays up to 60 Kilobytes of logged console data (about 60 pages of display in text mode) sent
from the system to the Console path.

Command Mode

CM: Command Mode—enter command mode
This command switches the console terminal from the MP Main Menu to mirrored command interface mode.
If the current mux authority is administrator and the new login is as an operator, the command mux will be
denied (remains in MP Main Menu mode). If a command is in progress, a message will be displayed warning
the new user of system status.

Console

CO: COnsole—leave command mode and enter console mode
This command switches the console terminal from the MP Main Menu to mirrored/redirected console mode.
All mirrored data is displayed. Type
For VT100 and HPTERM, verify that the MP setting in the CA command is correct and all mirrored consoles
are of the same terminal type for proper operation.
Chapter 4
to return to the MP command interface.
CTRL+B
Management Processor Command Interface
Utilities
59