PoS
Team
3600 Series
5.7.4. Legacy I/O Board
Caution: Be sure to observe all ESD precautions and power off procedures.
The Legacy I/O board has 2 powered USB connections installed and 3 RS232 ports.
For Legacy I/O board jumper settings refer to section 5.7.2.1.
1. Disconnect the AC power cord from the controller.
2. Remove the motherboard assembly (See Section 5.2) or top cover (See section 5.5).
3. Connect the data cables to the I/O board
D900000338
Issue 3
Installation
5-25