Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Fujitsu ESPRIMO Q9000
Summary of Contents for Fujitsu ESPRIMO Q9000
- Page 1 Operating Manual System ESPRIMO Q9000 ESPRIMO Q1510...
- Page 2 For automatic driver updates, go to: http://support.de.ts.fujitsu.com/de/support/index.html Should you have any technical questions, please contact: ● our Hotline/Service Desk (see the Service Desk list or visit: http://ts.fujitsu.com/support/servicedesk.html) ● Your sales partner ● Your sales office We hope you really enjoy using your new Fujitsu system.
- Page 4 Any liability that the data and illustrations are complete, actual or correct is excluded. Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may infringe the rights of such owner. For further information see http://ts.fujitsu.com/terms_of_use.html Order-No. Fujitsu Technology Solutions: A26361-K1001-Z220-1-7619, Edition 1...
- Page 5 ESPRIMO Q9000 ESPRIMO Q1510 Operating Manual Your ESPRIMO Q... Important notes Preparation for use Operation Settings in the BIOS Setup Security functions Troubleshooting and tips Technical data Index...
- Page 6 ESPRIMO is a registered trademark of Fujitsu Technology Solutions GmbH. Microsoft Windows 7, Windows Vista and Windows XP are registered trademarks of Microsoft Corporation. VESA and DPMS are trademarks of Video Electronics Standards Association. Pentium is a registered trademark of Intel Corporation, USA.
-
Page 7: Table Of Contents
Anti-theft protection with a Kensington Lock ..................25 BIOS setup security functions ......................26 Configuring password protection in the BIOS Setup ..............26 Changing the password......................27 Cancelling passwords ........................ 27 Troubleshooting and tips......................... 29 Help if problems occur........................29 Troubleshooting..........................29 Fujitsu Technology Solutions... - Page 8 No mouse pointer displayed on the screen.................31 Time and/or date is not correct ....................32 Error messages on the screen....................32 Installing new software........................32 Hard disk contents, restoring ......................32 Tips ..............................32 Technical data ...........................33 ESPRIMO Q............................33 Mains adapter .............................34 Index..............................35 Fujitsu Technology Solutions...
-
Page 9: Your Esprimo Q
(e.g. *.PDF, *.HTML, *.DOC, *.CHM, *.TXT, *.HLP) Some of the manuals mentioned can be found on in electronic form on the "Drivers & Utilities" CD/DVD or on the Internet under http://ts.fujitsu.com/support. You can quickly access and view the required information on the screen using the Adobe Reader program, which is also on the CD/DVD. -
Page 10: Notational Conventions
Texts which follow this symbol describe steps that must be performed in the order shown. indicates screen outputs. This font indicates programme names, commands, or menu items. This font "Quotation marks" indicate names of chapters, data carriers, and terms that are being emphasised. Fujitsu Technology Solutions... -
Page 11: Important Notes
Ensure that no liquid enters the system. Wipe the casing with a dry cloth. If particularly dirty, use a cloth that has been moistened in mild domestic detergent and then carefully wrung out. Use disinfectant wipes to clean the keyboard and the mouse. Fujitsu Technology Solutions... -
Page 12: Energy Saving, Disposal And Recycling
Contact the corresponding government office of the respective country for current information on possible operating restrictions. If your country is not included in the list, then please contact the corresponding supervisory authority as to whether the use of this product is permitted in your country. Fujitsu Technology Solutions... -
Page 13: Fcc Class B Compliance Statement
● Consult the dealer or an experienced radio/TV technician for help. Fujitsu Technology Solutions GmbH is not responsible for any radio or television interference caused by unauthorised modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Fujitsu Technology Solutions GmbH. The correction of interferences caused by such unauthorised modification, substitution or attachment will be the responsibility of the user. - Page 14 Important notes Fujitsu Technology Solutions...
-
Page 15: Preparation For Use
If you have received other devices in addition to your device (e.g. a printer or a modem), do not connect these until after the initial installation. The following sections contain a description of how to connect these external devices. Fujitsu Technology Solutions... -
Page 16: Setting Up The Device
USB devices are hot-pluggable. This means you can connect and disconnect devices while your operating system is running. Additional information can be found in the "Connecting external devices to the USB ports" section and in the documentation for the USB devices. Fujitsu Technology Solutions... -
Page 17: Ports
Special software (e.g. drivers) must be installed and configured for some of the devices that you connect (see the operating system and device documentation). You can also use the S-Video Out port (device dependent) as a SCART port if you connect an optional adapter cable. Fujitsu Technology Solutions... -
Page 18: Connecting The Monitor
USB device. To ensure USB 2.0, only a 3 m long cable may be used from the front USB port to the USB peripheral device. Fujitsu Technology Solutions... -
Page 19: Connecting The Device To The Mains Voltage
► Connect the mains adapter cable to the DC jack (DC IN) of the device (1). ► Connect the power cable to the mains adapter (2). ► Connect the power cable to a mains outlet (3). Fujitsu Technology Solutions... -
Page 20: Switching On For The First Time: Installing The Software
Switch the monitor on (see the operating manual for the monitor). ON/OFF switch with power indicator ► Touch the ON/OFF switch on the front of the device for approximately half a second. The power indicator lights white and the device is started. Fujitsu Technology Solutions... -
Page 21: Installing The Software
Consult the operating system manual if there is anything unclear about the requested input data. You will find further information about the system as well as drivers, additional software and updates on the "Drivers & Utilities" CD/DVD. Fujitsu Technology Solutions... - Page 22 Preparation for use Fujitsu Technology Solutions...
-
Page 23: Operation
The ON/OFF switch does not disconnect the device from the mains voltage. To completely disconnect the mains voltage, remove the power plug from the socket. ► If necessary, switch the monitor off (see the operating manual for the monitor). Fujitsu Technology Solutions... -
Page 24: Power Indicator
(if present) or disconnected from the mains, as this may result in data loss. – The device is switched off (disconnected from the mains) or is ready for use. If the device is ready it can be enabled with the ON/OFF switch. Fujitsu Technology Solutions... -
Page 25: Memory Card Reader (Esprimo Q1510)
Your dealer can supply you with an adapter for your memory card. Inserting the memory card ► Carefully insert the memory card into the slot. The side with writing on it must face upwards. Do not force the card in, otherwise the delicate contact surfaces can be damaged. Fujitsu Technology Solutions... -
Page 26: Taking Out The Memory Card
If your reader has a status display, remove the card only once this has stopped flashing. ► If your reader has a card interlock: Press on the memory card (1). The memory card is now released and can be taken out. ► Take the memory card out of the slot (2). Fujitsu Technology Solutions... -
Page 27: Optical Drive
Avoid storing a CD/DVD in areas subject to high temperatures or humidity. You may use 12-cm CDs/DVDs in the optical drive. Do not use any business card CDs or other small CDs. When using CDs/DVDs of poor quality vibrations and reading errors may occur. Fujitsu Technology Solutions... -
Page 28: Inserting A Cd/Dvd
Operation Inserting a CD/DVD The device must be switched on. ► Gently insert the CD/DVD into the drive with printed side facing upwards, until the CD/DVD is automatically drawn in. Fujitsu Technology Solutions... -
Page 29: Removing A Cd/Dvd
Remove the CD/DVD. Troubleshooting: If you push the eject button while the CD/DVD in the optical drive is still being accessed, the CD/DVD is not ejected automatically. Please wait for the reading process to finish, then try again. Fujitsu Technology Solutions... -
Page 30: Wireless Lan/ Bluetooth Radio Component (Optional)
Depending on the configuration level chosen, your device is already equipped with wireless LAN and Bluetooth. The installation of a wireless LAN module not approved by Fujitsu Technology Solutions GmbH voids the permits issued for this device (see "Technical data" chapter). -
Page 31: Settings In The Bios Setup
BIOS Setup. The current settings are not saved. Saving: The following function keys can also be used: Description to exit the BIOS Setup. The current settings are not saved. to exit the BIOS Setup. The current settings are saved. Fujitsu Technology Solutions... -
Page 32: Starting The Bios Setup
Press the ESC key to exit the selected menu. ► Note the changed entries. Exiting BIOS Setup To exit BIOS Setup, select menu Save Exit Setup or Exit without Saving from the menu bar. You can then decide which settings you want to save. Fujitsu Technology Solutions... -
Page 33: Security Functions
The device has a Kensington Lock device for the Kensington MicroSaver. With the Kensington MicroSaver, a sturdy steel cable, you can help protect your device from theft. The Kensington MicroSaver is available as an accessory. ► Fit the Kensington MicroSaver on the corresponding device on your equipment. Fujitsu Technology Solutions... -
Page 34: Bios Setup Security Functions
Enter the password again and press the Enter key. The new password will take effect when the device reboots. If you have configured a setup password and want to call BIOS Setup, you must enter the setup password. Fujitsu Technology Solutions... -
Page 35: Changing The Password
Call BIOS Setup and select the Set Password menu. ► Press the Enter key twice, without entering a password. The message Password Disabled will appear. The password will be cancelled after saving and exiting the BIOS Setup. Fujitsu Technology Solutions... - Page 36 Security functions Fujitsu Technology Solutions...
-
Page 37: Troubleshooting And Tips
► If you still need assistance resolving the problem, contact the relevant Service Desk for your country (see the Service Desk List or go to http://ts.fujitsu.com/support). Have the ID/serial No. of your system and the DIFS code ready. Troubleshooting... -
Page 38: The Device Cannot Be Switched Off With The On/Off Switch
Switch on the monitor and the device. Monitor cable is not connected. ► Switch off the monitor and the device. ► Check that the monitor cable is properly connected to the device and monitor. ► Switch on the monitor and the device. Fujitsu Technology Solutions... -
Page 39: No Mouse Pointer Displayed On The Screen
Check that the mouse cable is properly connected to the system unit. If you use an adapter or extension lead with the mouse cable, check the connections. ► Make sure that only one mouse is connected. ► Switch the device on. Fujitsu Technology Solutions... -
Page 40: Time And/Or Date Is Not Correct
► Close unnecessary applications. ► Run the applications in a different order. Other manuals You will find further manuals as PDF files on the "Drivers & Utilities" CD/DVD or on the Internet under http://ts.fujitsu.com/support. Fujitsu Technology Solutions... -
Page 41: Technical Data
5 °C ..35 °C Transport (2K2) –25 °C ..60 °C Condensation in operating must be avoided. The data sheet for this device provides further technical data. You will find the data sheet on the Internet under http://ts.fujitsu.com/support. Fujitsu Technology Solutions... -
Page 42: Mains Adapter
S261113-E533-V55. Electrical data Rated voltage 100 V to 240 V (automatic) Rated frequency 50 Hz to 60 Hz (automatic) Max. rated current: 1.5 A You can readily order an additional mains adapter and an additional power cable. Fujitsu Technology Solutions... -
Page 43: Index
12, 13 cleaning 3 Interfaces 9 connecting 8 connecting devices 8 indicators 16 Kensington Lock 25 port 9 anti-theft protection 26 setting up 8 Keyboard Status indicator 16 connecting 10 switching off 15 switching on 12, 15 Fujitsu Technology Solutions... - Page 44 10 dark 29 USB port 10 fails to light 29 connecting devices 10 Preparation for use 7 Preparing for operation 11 Video workstation 8 Recycling 4 Retransportation 3 Weight 33 Winter time 32 Safety notes 3 Fujitsu Technology Solutions...
- Page 45 Fujitsu Technology Solutions...