Removing A Board Carrier - Fujitsu CELSIUS J550 Operating Manual

System expansions

Removing a board carrier

► Remove the casing cover (see Chapter
► To release any display adapter support that may be present on the mainboard,
press it in the direction of the arrow (1).
► Disconnect the cables connected to the board(s).
► Pull the board carrier out of the casing in the direction of the arrow (2).
► Press together both ends of the display adapter support (3) and release the
display adapter support from the riser card (4).
62
"Removing the casing cover", Page
2
1
4
3
3
35).
Fujitsu