Table of Contents
Advertisement
PoS
Team
3600 Series
Standard CMOS Features
Caution: Even though there are 2 160 GB Seagate SATA Hard Drives
installed, it does not show up under this screen because the default SATA Mode
is RAID. If the SATA Mode was set to IDE, then the 2 Hard Drives would be
shown.
IDE Channel (0~1) Master/Slave:
With SATA Mode selected to RAID
IDE Channel 0 Master (None), IDE HDD Auto-Detection (Press Enter) – No change in
information status (Capacity, Cylinder, Head, etc. not changed).
IDE Channel 0 Slave (None), IDE HDD Auto-Detection (Press Enter) – No change in
information status (Capacity, Cylinder, Head, etc. not changed).
With SATA Mode selected to IDE:
IDE Channel 0 Master (ST3160815AS)
D900000338
(Default)
or AHCI:
Issue 3
BIOS
9-3
Hide quick links:
Advertisement
Table of Contents
