Closing The Workstation; Installing And Removing A Board - Fujitsu Siemens CELSIUS 4 Series Operating Manual

Closing the Workstation

Closing the Workstation
2
1
Ê
Place the side cover on the system unit in the direction of the arrow (1) so that the distance (a)
is approx. 10 mm.
Ê
Slide the side cover in the direction of the arrow (2) until it engages.
Ê
Fasten the screws (3).
Ê
Lock the system unit (4).
Ê
Return the system unit to its original position.
Ê
Reconnect the disconnected cables.

Installing and removing a board

!
Observe the notes on installing and removing boards in the chapter "Important notes".
The number, position and arrangement of the board slots on the system board can be found in the
Technical Manual for the system board. Boards may already be installed when the device is
shipped.
A26361-K547-Z400-1-7419
a
4
System expansions
3
3
English - 33