Fujitsu TeamPoS 3600 Series Installation & Maintenance Manual page 155

PoS
Team 3600 Series
Load saved DMI information:
1. Reboot system to bootable USB Drive and navigate to the directory where the files are
located
2. Type "winfo" and hit Enter
*** This should have restored the DMI contents ***
3. Power down and unplug the AC on the terminal
4. Power up and go into BIOS "System Info" and verify Mac Address and LAN are correct.
5. Load Optimized Defaults. If customer uses non default BIOS settings, make the changes
after Load Optimized Defaults are set.
6. Save and Exit BIOS
7. Restart back into the OS and verify functionality
D900000338 Issue 3
BIOS
9-37