General Requirements - Fujitsu TeamPoS 3600 Series Installation & Maintenance Manual

PoS
Team 3600 Series
4.7

General Requirements

1. The safety standards for Information Technology Equipment are only valid if the building
installation conforms to the National Electrical Code for the country where the equipment
is being installed.
2. For equipment that has a pluggable connection to its power source, the power source outlet
socket must be located near the equipment and must be easily accessible.
3. For protection against electric shock, certain parts of this equipment, including the
interface connections have been designed so that the voltage is limited to a safe value. In
order to maintain this protection it is essential that any equipment connected to Fujitsu
products shall have interface connections which are similarly protected.
4. When installing and disassembling equipment, be sure to follow anti-static protection
procedures. All controllers, terminals, peripherals, and boards are susceptible to damage
due to electrostatic discharge. Insufficient anti-static protection when handling boards
causes failure, degraded operation, and reduced reliability.
D900000338 Issue 3
Site Preparation
4-4