Fujitsu TeamPoS 3600 Series Installation & Maintenance Manual page 84

PoS
Team 3600 Series
10. Place the heat sink over the CPU with fins aligned front to back and secure the heat sink with
the four screws attached to it. Grip the heat sink bracket to hold it in place while the
spring-mounted screws are tightened. Then reconnect the heat sink fan power connector.
Warning: Do not plug or unplug the fan while the unit is powered on. Always
power down before disconnecting.
11. Reinstall the motherboard assembly (See Section 5.2).
D900000338 Issue 3
Maintenance
7-10