Legacy I/O Board - Fujitsu TeamPoS 3600 Series Installation & Maintenance Manual

PoS
Team 3600 Series

7.8.3. Legacy I/O Board

Caution: Be sure to observe all ESD precautions and power off procedures.
The Legacy I/O board has 2 powered USB connections installed and 3 RS232 ports.
1. Disconnect the AC power cord from the controller.
2. Remove the motherboard assembly (See Section 5.2) or top cover (See section 5.5).
3. Remove the two screws that connect the I/O board to the chassis.
D900000338 Issue 3
Maintenance
7-28