Fujitsu TeamPoS 3600 Series Installation & Maintenance Manual page 137

PoS
Team 3600 Series
USB Device Setting
Warning: For a USB device boot only case, if a certain USB port pair/pairs are
set to Disabled in the BIOS, hitting F10 and selecting a USB FDD to boot from
the disabled port will cause the system to stop booting. To resolve this issue,
either Re-enable the specific USB port pair or do not try to boot with a USB
FDD from a port that is set to Disabled in the BIOS
USB Device Setting
USB 1.0 Controller
USB 1.0 (UHCI) function support
Disabled: Disable all USB Function
Enabled: (Default) Enable USB 1.0 Support
Separate USB Host Control
Allows user to Enable/Disable each USB Host control function
Disabled: Disables USB Host Controller
Enabled: (Default) Enables USB Host Controller
USB Port 0/1 Function:
D900000338 Issue 3
BIOS
9-19