With Transfer Requests Set In The System Settings Menu - Lanier LD225 Fax Manual

Destination List
A Select [q Quick Dial].
B Enter the registration number
of the destination list where
the Receiving Station is stored.
For example, to select the regis-
tration number stored in Quick
Dial 01 of the Transfer Station,
enter: {0} {1}.
Note
❒ You can enter up to five digits.
Speed Dial
A Select [qp Speed Dial].
B Enter the number of the Speed
Dial code.
For example, to select the number
stored in Speed Dial 12 of the
Transfer Station, enter: {1} {2}.
Group Dial
A Select [qpp Group Dial].
B Enter the number of the Group
number.
For example, to select the number
stored in Group Dial 04 of the
Transfer Station, enter: {0} {4}.
G
To specify another Receiving Sta-
tion, press [Add].
Note
❒ Press [UPrev.] or [TNext] to see
the Receiving Stations already
entered. You can select a Re-
ceiving Station from this list and
remove it by pressing [Clear] or
the {Clear/Stop} key.
H
When you have specified all the
Receiving Stations, press [OK].
I
Press [Exit].
The Transfer Stations and Receiv-
ing Stations are displayed.
J
Press the {Start} key.
With transfer requests set in the System
Settings menu
You can program a Destination key
with Transfer Station and/or Receiving
Station under Program/Change/De-
lete Transfer Request in the System
Settings menu. See "Registering the
Transfer Request", General Settings
Guide.
A
Place the original, and then select
the scan settings you require.
Reference
p.15 "Placing Originals", Fac-
simile Reference <Basic Features>
p.34 "Scan Settings", Facsimile
Reference <Basic Features>
B
Press the key programmed with
Transfer Request.
C
Press the {Start} key.
Advanced Features
55
4