Memory Lock; Paper Tray; Programming/Changing Special Senders - Lanier LD225 Fax Manual

Memory Lock

Use this function to store incoming
documents from programmed send-
ers (Special Senders) in memory with-
out printing them. People without the
Memory Lock ID cannot print the
documents, and therefore this func-
tion is useful for receiving confiden-
tial documents. If you do not program
any senders, the machine receives fax
document from all senders using
Memory Lock reception.
Preparation
You must register Memory Lock
ID in advance. See p.194 "Program-
ming a Memory Lock ID".
Limitation
❒ If you program the same sender in
Memory Lock and Forwarding,
Forwarding is disabled.

Paper Tray

Use this function to print documents
received from programmed senders
(Special Senders) and the documents
from other senders on different types
of paper.
For example, if blue paper is in Tray 1
and white paper is in Tray 2, the ma-
chine prints the documents from Spe-
cial Senders on the blue paper and
prints the documents from other
senders on the white paper, making it
easy for you to separate the two.
If you do not program any Special
Senders, the machine outputs docu-
ments received from all senders using
the default paper tray.
Limitation
❒ For Polling Reception, you cannot
select the paper tray.
Using Administrator Settings
Note
❒ If the machine receives a document
that has a different size from the pa-
per in the specified tray, the machine
prints it after splitting it or minimiz-
ing its size. See p.101 "Page Separa-
tion and Length Reduction".
❒ Selection of the bypass tray enables
you to specify the paper size in
"Scan Area".

Programming/Changing Special Senders

A
Press the {User Tools/Counter} key.
B
Press [Facsimile Features].
C
Press [Administrator Tools].
D
Press [Program Special Sender].
E
Check [Program / Change] is select-
ed.
F
Select the destination to program
or change.
When programming a new Special
Sender, press [*Not Programmed].
9
175