Registering A Priority Function Using A Program - Lanier LD225 Fax Manual

Simplifying the Operation
B
Make sure that the machine is in
facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not shown,
press the {Facsimile} key.
C
Press the {Program} key.
D
Make sure that [Register] is select-
ed.
7
E
Select a program number in which
"*Not Stored" is shown.
Note
❒ If you make a mistake, press [Can-
cel] and select a program number
again.
❒ When you change a Keystroke
Program, press [Register] after
pressing the program number
you want to change. If you make
a mistake, press [Do not Register]
and return to step
130
F
ZLFS310N
Registering a priority function using a
program
You can select whether or not the func-
tion registered in program No. 1 is set
after the power is turned on or the
{Clear Modes} key is pressed.
After registering a function in pro-
gram No. 1, select [Program No.1] for
[Change Initial Mode] on the Facsimile
Features menu. See p.145 "General
Settings/Adjustment".
❒ Destinations and polling transmis-
❒ To store fax documents in the Doc-
E
.
Enter the program name, and then
press [OK].
The standby display appears.
Note
❒ If you make a mistake, press [Back-
space] or [Delete All], and then
try again.
❒ You should register the program
name.
❒ To cancel a program, press [Can-
cel]. The display returns to that
E
of step .
Reference
"Entering Text", General Set-
tings Guide
Limitation
sion cannot be registered in pro-
gram No.1 as Keystroke Programs.
Note
ument Server each time you send a
fax, register [Store & Transmit] for
Store File in program No.1, and
then set the values registered in
program No.1 to be used as the ini-
tial settings after power on or if the
{Clear Modes} key is pressed.