Printing The Special Sender List; Box Settings - Lanier LD225 Fax Manual

F
Press [Delete].
Note
❒ To cancel deleting a special sender,
press [Do not Delete]. The display
returns to that of step
G
Press [Exit].
H
Press the {User Tools/Counter} key.
The standby display appears.

Printing the Special Sender List

A
Press the {User Tools/Counter} key.
B
Press [Facsimile Features].
C
Press [Administrator Tools].
D
Press [Print List] next to "Program
Special Sender".
E
Press the {Start} key.
After printing the list, you can then
D
start from step
Note
❒ To cancel printing a list before
pressing the {Start} key, press [Can-
cel] or the {Clear/Stop} key. The
display returns to that of step
❒ To cancel printing a list after
pressing the {Start} key, press
[Stop Printing]. The display re-
turns to that of step
F
Press the {User Tools/Counter} key.
The standby display appears.
E
.
.
D
.
D
.
Using Administrator Settings

Box Settings

The following functions are for deliv-
ery and transfer of documents:
• Personal Box
• Information Box
• Transfer Box
Reference
For details about how to set up
these functions:
• p.182 "Programming/chang-
ing Personal Boxes"
• p.185 "Programming/chang-
ing Information Boxes"
• p.188 "Programming/chang-
ing Transfer Boxes"
For details about how to print out
and delete documents stored in
boxes:
• p.40 "Personal Boxes"
• p.42 "Information Boxes"
❖ SUB Code and SEP Code
SUB Code and SEP Code are IDs
consisting of up to 20 digits, and
can include numbers, #, *, and
spaces. To use this function, you
must program a box and SUB/SEP
Code beforehand. The other party
can send documents to, and re-
trieve stored documents from, this
box using the code.
Limitation
❒ You cannot set the same Box code
on two different boxes.
❒ Transmission or programming may
not be allowed if there is not enough
free memory left. The amount of
free memory left differs depending
on the optional equipment in-
stalled.
9
181