Having Incoming Documents Printed On Paper From The Bypass Tray - Lanier LD225 Fax Manual

Having incoming documents printed on
paper from the bypass tray
You can print documents sent from
Specified Senders on paper from the
bypass tray.
Set as follows:
• Program a special sender and select
the Bypass Tray for the paper tray
type. See p.179 "Programming By-
pass Tray Paper Size" under "Pro-
gram Special Sender".
• Turn on the Authorized RX func-
tion under the Program Special
Sender function. See p.179 "Pro-
gramming Authorized RX and
Special RX Function".
Limitation
❒ When using this function, printed
sheets cannot be delivered to the
finisher output tray. Even if you
specify the finisher output tray, sheets
are delivered to the Internal Tray 1.
See "General Features", General
Settings Guide.
Note
❒ You can load a maximum of 100 sheets
of standard paper in the bypass tray.
❒ You can use a size of paper not loaded
in the paper tray(s) in the bypass tray.
❒ The machine can detect A4L, A3L
1
(8 / "×11"L, 11"×17"L) paper siz-
2
es. When you load any other size,
specify the paper size. However, if
the specified paper size and size of
paper set in the bypass tray do not
match, paper jams may occur, or
the image may be shortened. See
p.179 "Programming Bypass Tray
Paper Size".
❒ Documents printed on paper smaller
than A4 may be shortened, or split
across sheets.
❒ Paper longer than 600 mm may be
creased, not sent, or jam.
❒ Print area depends on optional ex-
pansion memory, resolution, and
vertical length of originals.
❒ If you use this function, Image Rotation
and 180-Degree Rotating Printing are
not possible.
Printing Options
5
105