Sending An Auto Document - Lanier LD225 Fax Manual

Other Transmission Features
D
Select the standard message to be
stamped, and then press [OK].
The selected standard message is
shown above the highlighted [Std.
Message].
4
Note
❒ To cancel the selection, press
[Cancel]. The display returns to
that of step
❒ Programmed standard messag-
es are shown in the keys.
❒ The machine cannot stamp mul-
tiple standard messages.
E
Press [OK].
F
Specify the destination, and then
press the {Start} key.

Sending an Auto Document

If you often send a particular page to
people (for example a map, a stan-
dard attachment, or a set of instruc-
tions), store that page in memory as
an Auto Document. This saves res-
canning every time you want to send
it.
You can fax an Auto Document by it-
self, or attach it to a standard fax doc-
ument.
Preparation
You need to register an Auto Document.
See p.158 "Storing, Changing, and
Deleting an Auto Document".
66
C
.
Note
❒ You can attach one Auto Document
to each transmission.
❒ You can store up to 6 Auto Documents.
See p.158 "Storing, Changing, and
Deleting an Auto Document".
❒ Files with Auto Documents are sent
by Memory Transmission.
❒ When sending an Auto Document
with other files, the Auto Document
is sent first.
❒ Storing Auto Documents reduces
the amount of free memory slight-
ly. Unless you delete the document,
free memory will not return to 100%.
❒ You can print an Auto Document
currently stored in memory. See
p.67 "Printing documents stored
as Auto Documents".
❒ You can program one of the Quick
Operation keys with operations for
this function. Using the Quick Op-
eration keys allows you to omit
step B. See p.145 "General Set-
tings/Adjustment".
A
Place the original, and then select
the scan settings you require.
Reference
p.15 "Placing Originals", Fac-
simile Reference <Basic Features>
p.34 "Scan Settings", Facsimile
Reference <Basic Features>
Note
❒ When you fax an Auto Document,
start from step
B
.