When Specifying A Group With A Quick Dial; When Specifying A Group With The Group Key - Lanier 3730 Operating Instructions Manual

Faxing
When Specifying a Group with a Quick
Dial
Make sure that the Memory Trans-
mission indicator is lit, if not, press
the {Memory Trans.} key to light it.
Note
2
❒ You must register Groups to Quick
D i a l s b e f o r e h a n d . S e e p . 5 9
"Groups"
A
Make sure that the machine is in
standby display.
B
Set your original and select any
scan settings you require.
C
Press the Quick Dial key in which
the Group is programmed.
Note
❒ If you make a mistake, press the
{Clear/Stop} key and try again.
❒ If you wish to dial another des-
tination, press the {OK} key,
and then dial another fax num-
ber.
D
Press the {Start} key.
40
When Specifying a Group with the Group
key
Make sure that the Memory Trans-
mission indicator is lit, if not, press
the {Memory Trans.} key to light it.
Note
❒ Group Dial is assigned to {F4} as a
default setting. If this setting is
changed, you must program the
Group function in a User Function
key beforehand. See p.51 "User
Function Keys", Advanced Features.
A
Make sure that the machine is in
standby display.
B
Set your original and select any
scan settings you require.
C
Press the User Function key pro-
grammed with the Group func-
tion.
D
Enter the Group number (1 to 5)
with the number keys.
Note
❒ If you want to specify another
Group, press the {OK} key, and
then repeat step C above.
❒ If you make a mistake, press the
{Clear/Stop} key, and the dis-
play will return to that in step B.
E
Press the {Start} key.