Automatic Redial; Batch Transmission; Dual Access; Transmission With Image Rotation - Lanier LD225 Fax Manual

Automatic Redial

If a fax document could not be sent
because the line was busy or an error
occurred during transmission, the line
is switched to another at five-minute in-
tervals and redial is attempted up to
five times.
If redialing fails after four redials, the
machine cancels the transmission and
prints a Communication Result Report
or Communication Failure Report.
See p.82 "Communication Failure Re-
port" and p.32 "Communication Re-
sult Report (Memory Transmission)",
Facsimile Reference <Basic Features>.

Batch Transmission

If you send a fax document by Mem-
ory Transmission and there is another
fax document waiting in memory to
be sent to the same destination, that
document is sent along with your
original. Several fax documents can
be sent with a single call, thus elimi-
nating the need for several separate
calls. This helps save communication
costs and reduce transmission time.
Fax documents whose transmission
time was set in advance are sent by
batch transmission when that time is
reached.
Limitation
❒ This function is not available with
Internet Fax and IP-Fax.
Note
❒ You can turn this function on or off
with the User Parameters. See p.167
"User Parameters" (switch 14, bit 2).
❒ The originals to be transmitted at a
specific time is sent at that time.
❒ If fax memory is overloaded, docu-
ments may not be sent in the order
they were scanned.
More Transmission Functions

Dual Access

The machine can scan other docu-
ments into memory even while send-
ing a fax document from memory,
receiving a document into memory,
or automatically printing a report.
Since the machine starts sending the
second document immediately after
the current transmission ends, the
line is used efficiently.
Note
❒ During Immediate Transmission or
when in User Tools mode, the ma-
chine cannot scan an original.
Transmission with Image
Rotation
Generally, place A4, 8
nals in the landscape orientation (L).
If you place an A4, 8
in the portrait orientation (K), the
image is sent rotated by 90°. Provid-
ing the receiver has A4, 8
landscape paper (L), the document
is printed the same size as the origi-
nal.
Note
❒ This function is unavailable with
Immediate Transmission.
❒ When Image Rotation is used, all
documents are sent by normal
Memory Transmission.
1
/ "×11" origi-
2
1
/ "×11" original
2
1
/ "×11"
2
4
79