Ricoh DDP92 Maintenance Manual page 64

5.2.9. E1C3
PRIMARY FACTOR; Paper did not arrive at the Folding Passage PS/1 in the Folding Mode.
PHENOMENON CAUSES & CHECK POINTS
1. This phenomenon 1.
occurs because
the paper has not
2.
arrive the Folding
Passage PS/1.
2. This phenomenon 1.
occurs though the
paper has arrive
at the Folding
2.
Passage PS/1.
3.
Figure 5-12
Refer to
5.2.10. E1C4
PRIMARY FACTOR; Paper did not arrive at the Folding Paper Exit PS.
PHENOMENON CAUSES & CHECK POINTS
1. This phenomenon 1.
occurs because
the paper has not
2.
arrive the Folding
Paper Exit PS.
2. This phenomenon 1.
occurs though the
paper has arrive
at the Folding
2.
Paper Exit PS.
3.
Figure 5-12
Refer to
FNS LEAD JAM 6
Foreign substance is on Remove: Foreign substance
the paper path.
PCB fault. Replace: FS-108H/HBM P/K
The breaking of cables or Repair the cable or reset the
the disconnecting of connector
connectors. CN9 - PS28
Sensor fault. Replace:
Folding Passage PS/1 (PS28)
PCB fault. Replace: FS-108H/HBM P/K
FNS LEAD JAM 7
Foreign substance is on Remove: Foreign substance
the paper path.
PCB fault. Replace: FS-108H/HBM P/K
The breaking of cables or Repair the cable or reset the
the disconnecting of connector
connectors. CN9 - PS25
Sensor fault. Replace:
Folding Paper Exit PS (PS25)
PCB fault. Replace: FS-108H/HBM P/K
M M L 0 0
CORRECTIONS
3.5, 3-7
3.4, 3-3
3.5, 3-7
CORRECTIONS
3.5, 3-7
3.4, 3-3
3.5, 3-7
Maintenance
Ref + Page
Maintenance
Ref + Page
5-19
Troubleshooting