Ricoh DDP92 Maintenance Manual page 104

10. Open the Front Cover. Remove the Front Side E-ring and the Shaft Holder.
11. Remove the spring.
Figure 6-21. Removal of the Paper Exit Opening Unit
12. Remove the four +screws holding the Paper Exit Opening Cover and take off the
cover.
13. Lift the Paper Exit Opening Unit up and out.
Figure 6-22. Removal of the Paper Exit Opening Unit
[Assembling Procedures]
1. Reinstall the Paper Exit Opening Unit reversing the procedure above.
6-15
Disassembling, Assembling & Adjustment
M M L 0 0