4. Loosen the four magnet-holding screws (two at the front and two at the back), and
move the Conveyance Guide Plate B all the way in the direction indicated by the
arrow.
5. Remove the E-ring and the gear.
6. Adhere the magnets to the Conveyance Guide Plate A and retighten the +screws.
Figure 6-51. Adjustment of the Magnets on the Conveyance Guide Plate B
[Assembling Procedures]
1. Reinstall the FNS 108H P/K reversing the procedure above.
M M
L
0 0
Disassembling, Assembling & Adjustment
6-31