Ricoh DDP92 Maintenance Manual page 125

7. If either measurement is out of spec, carry out adjustment as described below.
8. Loosen the 2 set screws holding the solenoid, and move the solenoid as neces-
9. Retighten the screws.
Figure 6-56. Adjustment of the Paper path switching Gate
[Assembling Procedures]
1. Reinstall the FNS 108H P/K , the rear cover and the Cover Sheet Feeder (If
6-36
DDP92/184 Finisher Maintenance Manual
sary to adjust.
installed) reversing the procedure above.
M M L 0 0