4. Remove the two plates from the booklet exit (one plate on each side).
Figure 6-42. Removal of the Folding Unit
5. Remove seven set screws at the front.
6. Pull the Folding Unit out and off.
CAUTION:
Be careful to keep the unit clear of the up/down wires when removing it.
Figure 6-43. Removal of the Folding Unit
[Assembling Procedures]
1. Reinstall the Folding Unit reversing the procedure above.
CAUTION:
Be careful to keep the harness from catching on the finisher body.
M M
L
0 0
Disassembling, Assembling & Adjustment
6-25