Ricoh DDP92 Maintenance Manual page 103

5. Remove the clamp screw and the ground wire screw.
6. Detach the SD4 (paper exit opening) and PS6 (paper exit-1) connectors.
7. Remove the screw holding PS10 (paper exit-2) to the unit.
8. Remove PS10 and detach the connector.
CAUTION:
When withdrawing the PS10, ensure that needless force is not applied to the lever
below the PS10.
Figure 6-19. Removal of the Paper Exit Opening Unit
9. Remove the Paper Exit Opening Open-shut Link screw.
Figure 6-20. Removal of the Paper Exit Opening Unit
6-14
DDP92/184 Finisher Maintenance Manual M M L 0 0