5. Detach the connector from the Clincher and remove the four +screws holding the
Figure 6-31. Removal of the Clincher Unit
6. Lift the Clincher up and out.
Figure 6-32. Removal of the Clincher Unit
[Assembling Procedures]
1. Reinstall Clincher Unit reversing the procedure above.
2. Adjust the stapler vertical position.
6-20
DDP92/184 Finisher Maintenance Manual
Clincher.
(Refer to item 6.3.17 on page 6-52)
M M
L
0 0