Ricoh DDP92 Maintenance Manual page 13

Table 1-1. Stacking Mode and Capacity
Amount of offset
Stapling capability
1-2
DDP92/184 Finisher Maintenance Manual
Number of Other than A3 SEF, 11 x
stapled sheets
2 to 9 100 stacks
10 to 20 50 stacks
21 to 30 30 stacks
31 to 40 25 stacks
41 to 50 20 stacks
4. Center stapling/folding mode (Option)
Booklets can be stacked until the sensor detects the stacker tray full in
the booklet mode. The referential stacking capacities are shown below.
Center stapling mode---- 5-sheet-folded booklet of ledger size paper x
20 set
Center folding mode----- 3-sheet-folded booklet of ledger size paper x 33 set
5. Cover sheet feeder (Option)
200 sheets equivalent (34 lbs. paper ), within 40mm in height
The allowable amount of paper curl with the following way is 10mm
maximum
Amount of paper curl
Maximum 50 sheets (75 g/m
A3 SEF, 11 x 17,
17,12x18 , A5 12x18 , A5
50 stacks
50 stacks
30 stacks
25 stacks
20 stacks
5 sheets of printed paper
30 mm Note: Non-staple mode only
2
, 5.0 mm and below)
M M L 0 0