4
BroadWorks Device Identity/Profile
BroadWorks configurable device identify/profile is introduced in BroadWorks Release 14.0.
This section applies only to BroadWorks Release 14.0 and later.
The following table identifies the required BroadWorks device identity/profile settings for
interoperability between the GXW-4004/GXW-4008/HT-502 and BroadWorks. For an
explanation of the profile parameters, refer to the BroadWorks Device Inventory Guide
1.a)i.[4].
For most of the parameters below, an "X" indicates the parameter function is supported
and/or required. If the item is blank, it is not supported.
Grandstream GXW-4004/GXW-4008/HT-502 Identify/Device Profile
Signaling Address Type
Number of Lines
Ringback Tone/ Early Media
Support
Registration Capable
Static Registration Capable
E.164 Capable
Trusted
Authentication Override
Video Capable
RFC 3264 Hold
Route Advance
Wireless Integration
PBX Integration
Use Business Trunking Contact
Forwarding Override
Conference Device
Music On Hold Device
Web Based Configuration URL
Auto Configuration Type
Reset Event
Enable Monitoring
CPE System File Name
Device File Format
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X
©
2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
Intelligent Proxy Addressing
GXW-4004: 4 lines
GXW-4008: 8 lines
HT-502: 2 lines
Local Ringback – No Early Media
X
X
2 Config file
checkSync
gxwSystem.txt / htSystem.txt
%BWMACADDRES%.txt
DOCUMENT NUMBER
PAGE 10 OF 25