Profiles/Profile X/General Settings - Grandstream Networks GXW42 Series Settings Manual

4.2.1.4 Profiles/Profile X/General Settings

For each DCC on the system, you will create a profile. Each profile will specify the IP address of the DCC server
on the "General Settings" page.

Ensure that the "Profile Active" setting is set to "Yes".

Set the "SIP Server" address to the DCC address for this exchange.
The page shown specifies the server address for the first profile ("Profile 1"). If you have more than 13 ports in
use, you will have the other ports assigned to another profile (for another exchange DCC) such as "Profile 2". In
this case you will repeat these settings for the other profile pages accordingly, using the correct "SIP Server"
address for the other exchange DCC(s).
Page 10
Grandstream FXS Gateway Settings Guide
April 2015 DXL-APP-204-Pv1