This page has five tabs: SNMP Settings, SNMP Community, SNMP Trap Destination, SNMP V3 Users, and SNMP Trap Proxy. Please refer to the belo
tables for each tab.
SNMP Settings
Enable
Device Name
Device Location
Contact Email
Enable SNMP Trap Proxy
SNMP Trap Proxy Listening Port
SNMP Community
Name
Access Level
SNMP Trap Destinations (GXW450x as managed
device)
Name
Figure 44: SNMP Settings
Enables SNMP feature.
Default is Disabled.
Configures the Device Name.
Configures the Device Location.
Configures the email address of the administrator on which to receive notifications.
Enables the SNMP Trap Proxy.
Default is Disabled.
Configures the SNMP Trap Proxy Listening Port.
The default port is 162.
Community string associated with the trap. It must match the community string of the
receiver.
Configure the access level. Two levels are available:
Read only: Can view the device configuration.
Read/Write: Can view and change the device configuration.
Configure the Name for the SNMP Trap Destination.