Table 10: Profile Settings - Grandstream Networks GXW42 SERIES User Manual

http://arttel.ru
Primary Radius
Server Secret
Secondary
RADIUS Server
Secondary
RADIUS Auth
Port
Secondary
RADIUS Acct Port
Secondary
Radius Server
Secret
RADIUS Timeout
RADIUS Retry
Download Device
Configuration
Profile Active
Primary SIP
Server
Failover SIP
Server
Prefer Primary
SIP Server
Outbound Proxy
FIRMWARE 1.0.0.49
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-grandstream-gxw4216
Special secret string should be preconfigured according to RADIUS Server configuration
IP Address or FQDN of the secondary RADIUS Server
Secondary Radius server authentication port. Default value is 1812
Secondary Radius server accounting port. Default value is 1813
Special secret string should be preconfigured according to RADIUS Server configuration
Default value is 2 seconds. The time between retries the GXW will send "Access-Request"
message to RADIUS server in purpose to authenticate it.
Default value is 3 times. Number of times the device will try to authenticate itself with
preconfigured RADIUS server during initialization process.
This setting allows user to download a text file containing all the P values of each setting as
configured on the unit. (Note: For Security Reasons, any Password will not be Downloaded)

TABLE 10: PROFILE SETTINGS

When set to Yes the SIP Profile is activated.
Primary SIP Server's IP address or Domain name provided by VoIP service provider.
Failover SIP Server's IP address or Domain name provided by VoIP Service provider. This
server will be used if the Primary SIP server becomes unavailable.
Default is No. If set to yes it will register to Primary Server if registration with Failover server
expires
IP address or Domain name of Outbound Proxy, or Media Gateway, or Session Border
Controller. Used by GXW42XX for firewall or NAT penetration in different network
environments. If symmetric NAT is detected, STUN will not work and ONLY outbound proxy
can correct the problem.
GXW42XX USER MANUAL PAGE 38 OF 54