Configuring Conference Bridges; View Conference Bridge Statuses - Grandstream Networks GXE5024 User Manual

Set SIP peer information: Enter the SIP gateway IP address or domain name in the
SIP Gateway URL field.
Set Heart Beat to Yes to Enable or disable availability detection of the remote side
(requires compatibility on the remote end)..
Outbound call handling: Set the Max Concurrent Calls Allowed to prevent too many
concurrent attempts to send calls out this trunk.
Set the Dial Prefix digit to specify an outbound call to be dialed through this trunk.
When the call is sent out via this trunk, the dial prefix digit is removed
Inbound call handling: Set the destination to route incoming calls on this trunk to.
Share trunk with peer systems: If this trunk is to be available for use by peer
systems, set the Allow Other IPPBX Use setting to Yes.
When done, click on the Submit button to add the extension or Cancel to go back.
Modify: Click on the Modify button to the right of the row displaying information for the
external PSTN trunk you wish to modify. The external PSTN trunk details page will be
displayed, allowing you to modify all of the external PSTN trunk's settings. When done,
click on the Submit button to save your changes or Cancel to go back.
Delete: Click on the Delete button on the far right of the row displaying the information
for the external PSTN trunk you wish to delete. You will be prompted for confirmation
via a dialog box; click OK to confirm or Cancel to go back.

4. Configuring Conference Bridges

-

View conference bridge statuses

The GXE supports up to four conference bridges, each one supporting up to ten
participants. In the Conference Bridge menu, the status, number of attendees, and the
duration of an ongoing conference is displayed.
Version .02
GXE502x User Manual 2/26/2008
12