Configuration Guide; Configuring Gxw400 X Via Voice Prompt - Grandstream Networks GXW400x User Manual

C
ONFIGURATION
C GXW400
ONFIGURING
DHCP M
ODE
Select voice menu option 01 to enable GXW400x to use DHCP.
STATIC IP M
ODE
Select voice menu option 01 to enable GXW400x to use STATIC IP mode, then use option 02, 03, 04, 05
to set up IP address, Subnet Mask, Gateway and DNS server respectively.
F S IP A
IRMWARE ERVER DDRESS
Select voice menu option 13 to configure the IP address of the firmware server.
C S
ONFIGURATION ERVER
Select voice menu option 14 to configure the IP address of the configuration server.
U P
PGRADE ROTOCOL
Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose
between TFTP and HTTP.
F U M
IRMWARE PGRADE ODE
Select voice menu option 17 to choose firmware upgrade mode among the following three options:
1) always check, 2) check when pre/suffix changes, and 3) never upgrade
WAN P W A
ORT EB CCESS
Select voice menu option 12 to enable WAN Port Wed Access of the device configuration pages.
Grandstream Networks, Inc.
G
UIDE
V V P
X IA OICE ROMPT
IP A
DDRESS
GXW400x User Manual
Firmware 1.0.0.67
Page 16 of 35
Last Updated: 10/2007