Rebooting And Resetting To Default; Configuring Syslog Logging - Grandstream Networks GXE5024 User Manual

Configuration files may be downloaded to or uploaded from your computer in the Backup &
Restore Configure section. It is good practice to keep a backup copy of your configuration
file at all times.
Configuration backup: Select the Download Configure radio button, and click on the
Submit button. You will be prompted to download the configuration file onto your
computer.
Configuration restore: Select the Upload Configure radio button, and click on the
Browse... button to find the configuration file on your computer. After the file has been
selected, click on the Submit button and wait for the file to finish uploading. The GXE
will automatically reboot when finished, and load the configuration file.

Rebooting and resetting to default

-
The Reset & Reboot section allows rebooting of the GXE or resetting of all settings to
factory default. Please backup the configuration file before resetting to factory default,
should you decide you need to restore the system configuration.
Rebooting: Select the Reboot radio button, and click on the Submit button. The GXE
will reboot itself.
Resetting to default: Select the Reset to Default radio button, and click on the Submit
button. The GXE will reboot itself, and will boot up with all factory default settings. The
web configuration page access password will revert back to the default password of
"admin".

Configuring Syslog logging

-
Version .02
GXE502x User Manual 2/26/2008
28